SYP Direct Partners

To find the cheapest oak floor you need to understand Oak grades. Red and White Oak grades are  based on the face surface, specifically its appearance. The most common grades of domestic hardwood wood flooring are; clear (c & btr), select (s & btr), # 1 common, # 2 common and a variety of proprietary grades. Yes, proprietary, as in they make it up. Now, this is not always a bad thing, not at all. However, many times these creations are about raising the price, i.e. natural rustic = #2 common everywhere else.

The premium Oak Grades

Clear Grade Oak is cut and harvested from the innermost heartwood of the tree. Color discrepancies of dark to light and variations such as knots and worm holes will be at the absolute minimum if not non-existent in this grade of oak. The grain, however, will still be prominent while having a clean overall look. Due to clear being the highest grade, mills pick carefully through each and every piece to ensure that the milling of the seams, butt joints, and tongue and groove are milled precisely. 

Select and Better. Select and Better will typically have clear pieces mixed into the bundles. You’ll have minimal variation from the sapwood. There will be virtually no knots or worm holes on these boards though some will be present. The appearance of the grain is strong with very slight color variations of heartwood and sapwood. 

The Common Oaks

No. 1 Common. No. 1 Common grade is where much more variation and discrepancies will show through. You will have some knots and wormholes. You will have color variations of the sapwood to heartwood. The color is not as uniform as Clear or Select. There will be some lighter and some darker pieces and depending on the width of the board, you may have that occurring on the same board. 

No. 2 Common. No. 2 Common will have a lot of color variations of dark and light pieces from the heartwood and sapwood. There will be an abundance of knots and wormholes. This floor will have a much more rustic appearance than clear or select. The milling and natural faults of this grade will not be as clean and precise as the above grades. 

Defects, i.e. Tavern, Cabin grades

No. 3 Common. Not many professionals recommend No 3 Common for White oak- especially not for flooring. The pieces are too inconsistent in terms of milling and natural characteristics. More often than not, you will have a large waste pile after having to sort through all the pieces to find the ones good enough to install. With that being said, due to the high waste volume, you’ll have to account for that during ordering. While it is industry standard to order 10% more of the overall square footage, you’ll have to order over 20% more to make up the waste difference. Instead of choosing No. 3, it’s better to order No. 2 Common. You will still have all those natural characteristics but with an overall better product. 

Cabin & Tavern Grades answer the question do you have “cheap oak floors”?

Cheap Oak Floors – Shorts aka micro shorts-  While not technically a grade of flooring but worth noting. Shorts are exactly what that sounds like. Short pieces of flooring typically range from 6 inches to about 2-3 feet. While you will have some shorts in regular bundles (we call them spacers as they help in staggering the hardwood), when you order all shorts the bundles will not contain any long pieces.  Regardless of the grade of shorts, there will be A LOT of seams. As a general rule, we like to keep our stagger to every 6 inches at lease. Meaning that the butt joints from row to row will not be closer than 6 inches. 

Builders Welcome

Builders and installation professionals who understand that real wood takes time, welcome to SYP Direct. We do not take shortcuts and we do not sell to those of you that do, end of story. However, if you are a real wood pro, with or without pine experience, welcome to the best source you will ever find. Select Hardwoods from the best mills, amazing direct prices; White Oak, Red Oak, Hickory, Walnut and more.